Silicone Surface Treatment Agent
Generally, silicone is soft, easy to attract dust and has an anti-slip effect. After applying a silicone surface treatment agent, it can improve the slip effect and dust pick up problem.
Product Code | Mixing Ratio A:B |
Curing Conditon |
P-100 | 1:1 | Heat cure |
P-101 | 1:1 | Heat cure |
P-540 | 1:1 | Heat cure |
Silicone is basically a release material, it is difficult for other polymers to adhere onto its surface. In this regard, there is a need to apply a layer of silicone surface treatment agent, then followed by a polymer adhesive like PU, etc. before curing it.
Product Code | Mixing Ratio A:B |
Curing Conditon |
16-253 | One Component | Ambient cure or heat cure |
Primer for Bonding Silicone
Silicone is not easy to adhere to most substrates. By applying a primer on the surface on which the silicone will be adhered to, it can increase its adhesion.
Product Code | Mixing Ratio A:B |
Curing Condition |
15-256 | One Component | Heat cure 130~150℃, 30 mins. |